POWERHOUSE COLLECTION

Model flying machine 'No 10' by Lawrence Hargrave

Object No. B115

The Museum of Applied Arts and Sciences holds the largest collection of material internationally of the aviation pioneer, Lawrence Hargrave. While no single individual can be attributed to the invention of the aeroplane, Hargrave belonged to an elite body of scientists and researchers (along with Octave Chanute, Otto Lilienthal and Percy Sinclair Pilcher) whose experiments and inventions paved the way for the first powered, controlled flight achieved by the Wright Brothers on December 17, 1903. Hargrave's greatest contribution to aeronautics was the invention of the box or cellular kite. This kite evolved in four stages from a simple cylinder kite made of heavy paper to a double-celled one capable of lifting Hargrave sixteen feet off the ground. The fourth kite of the series, produced by the end of 1893, provided a stable supporting and structural surface that satisfied the correct area to weight ratio which became the foundation for early European built aircraft. For example, Hargrave's box kite appears to be the inspiration for Alberto Santos Dumont's aircraft named '14bis', which undertook the first powered, controlled flight in Europe in 1906. Similarly, Gabriel Voisin states in his autobiography that he and his brother Charles, who manufactured the first commercially available aircraft in Europe, owe their inspiration to their construction to a Hargrave box kite, while via correspondence with Octave Chanute, there is also evidence for Hargrave's box kite influencing the aircraft used by the Wright Brothers during their historic flight in 1903. Hargrave's contribution to aeronautics can also be observed in other ways. For example, he conducted important research into animal movement and produced a number of flapping models which successfully demonstrated a means of propulsion. However, the flapping wing models were unable to ascend or lift from ground level with manpower alone. This prompted Hargrave to design and produce alternative power sources including a variety of engines, the most influential being his three cylinder radial rotary engine. This arguably formed the basis of the idea for the famous French Gnome engine, which became the primary source of aircraft power for the French Allies in World War I. Beyond aviation, Hargrave is also significant for his exploration work in the Torres Strait and New Guinea. In 1876, for example, he joined Luigi d'Albertis' expedition to the Fly River and on completion, was regarded as an expert cartographer who held an unrivalled knowledge of the region. Hargrave also contributed to the study of astronomy with his development of adding machines to assist Sydney Observatory in their calculations. He similarly researched and wrote on Australian history and was an early proponent for the establishment of a bridge across Sydney Harbour. References Adams, M., "Wind Beneath His Wings - Lawrence Hargrave at Stanwell Park" (September 2004) ADB Online, "Lawrence Hargrave", http://www.adb.online.anu.edu.au/biogs/A090194b.htm (Downloaded 18/7/2007) Grainger, E., "Hargrave and Son - A Biography of John Fletcher Hargrave and his son Lawrence Hargrave" (Brisbane, 1978) Hargrave, L., "On a Compressed Air Flying-Machine" (Read before the Royal Society of New South Wales, June 4, 1890) Hudson Shaw, W & Ruhen, O., "Lawrence Hargrave - Explorer, Inventor & Aviation Experimenter" (Sydney, 1977) Roughley, T.C., "The Aeronautical Work of Lawrence Hargrave" (Technological Museum, Sydney Bulletin No.19, 1939)

Loading...

Summary

Object Statement

Model flying machine, compressed air 'No 10', paper / wood / metal / string, made by Lawrence Hargrave, Rushcutters Bay, New South Wales, Australia, 1889

Physical Description

Flying machine with metal tube for the fuselage, hinged wings covered with brown paper near front and larger rectangular running the length of the body. Large wing has five cross struts mounted in a wide "V" form, supporting its paper covering. A wooden rod protrudes from the nose and has strings attached that brace the flapping wings. Mounted above the wing hinges on the body is a metal cylinder with one piston on the side. A metal arm links the piston rod to the proper left wing hinge. The metal fuselage ends at the third wing segment and a wooden rod extends to the end of the main wing.

DIMENSIONS

Height

440 MM

Width

1387 MM

PRODUCTION

Notes

This flapping wing machine model, driven by a single cylinder compressed air engine (No. 10), was produced by Lawrence Hargrave in Rushcutters Bay, New South Wales, Australia in 1889. The model comprises a tube which forms the spine of the body, storing the compressed air; a piston-rod which is fastened to the end of the tube and an engine cylinder which moves up and down over the piston. The cylinder is connected to the rods (which support the wings) by a pair of links and a valve worked by tappets helps to admit and exhaust the air to the cylinder. The wings of the model are made from paper and weigh 3 oz. The piston is made from vulcanite and the cylinder has been made like an ordinary tin can. Two unique features of the model include its long body used to provide longitudinal stability and a bowsprit (or projecting stick) to break the model's fall. Long bodies were a characteristic feature of all Hargrave's early models until 1890, at which time he decided to experiment with shorter ones.

HISTORY

Notes

Hargrave's flapping wing machine models formed part of his earliest experiments between 1884 and 1892. They were conceived from a theoretical study conducted by Hargrave into the movement of animals like fish, snakes and jellyfish, as well as the movement of waves (a theory he famously dubbed at a Royal Society meeting as 'The Trochoided Plane'). This theory prompted him further into the study of birds and their anatomy and the use of flapping wings as a means for propulsion, hence the development of the flapping wing model. Hargrave's initial models of this type were powered by clockwork, but he later replaced this with rubber bands and then compressed air and steam. The decision to use compressed air came about after Hargrave conducted a comparative experiment into a flapping wing and screw propelled model (B113 and B114), where he discovered that both methods of propulsion seemed to be equally efficient. This particular model, which was tested on April 8, 1890, was found to fly 368 feet by 870 ft pounds of energy. That is, 98 feet more than Hargrave's best result with an India powered model (the 48 band 'Experiment L'). The second of four children of John Fletcher and Ann, Lawrence Hargrave was born at Greenwich, London on January 29, 1850. In 1856, Lawrence's father, eldest brother Ralph and uncle Edward emigrated to Australia in what appears to be a consensual marital separation between John and Ann. They were bound for Sydney to join a third brother of John and Edward, who was a member of the Legislative Assembly for New England (named Richard), while Ann, Lawrence and her two other children, Alice and Gilbert, stayed in Kent, England. During his early years, Lawrence was educated at the Queen Elizabeth's School in Kirkby Lonsdale, Westmoreland, before he sailed to Australia in 1865 to join his father, brother and two uncles. John Fletcher, who was a distinguished judge in the New South Wales Supreme Court living at Rushcutters Bay House, anticipated a career for Lawrence in law. Despite organising tuition for him, Lawrence failed to matriculate, but was subsequently accepted to begin an apprenticeship with the Australasian Steam Navigation Company (ASN Co) in 1867. For five years he worked as an apprentice, gaining invaluable skills in woodworking, metalworking and design. The circumnavigation voyage of Australia aboard the 'Ellesmere' (offered to Lawrence by another passenger en route to Australia from London) obviously stimulated an interest for Lawrence in exploration. From 1871, Lawrence joined the Committee of Management of J.D. Lang's New Guinea Prospecting Association and in 1872 was on board the brig 'Maria', bound for New Guinea in search of gold, when it sunk off Bramble reef, north Queensland, causing great loss of life. After returning to Sydney to work for the ASN Co, and later the engineers P.N. Russell & Co, Lawrence participated in several more exploratory voyages to the Torres Strait and New Guinea, accompanying figures like William Macleay, Octavius Stone and Luigi d'Albertis along the Fly River. These voyages continued until 1876, at which time Lawrence worked at the foundries of Chapman & Co, before choosing to settle down with new wife, Margaret Preston Johnson in September, 1878 with whom he had six children (Helen-Ann (Nellie), Hilda, Margaret, Brenda, Geoffrey and Brenda-Olive). In January of the following year, Lawrence commenced work as an extra observer (astronomical) at Sydney Observatory under the Government astronomer H.C. Russell. In this role, Lawrence was able to make a number of important observations and inventions, including the transit of Mercury in 1881, the Krakatoa explosion in 1883 and the design and construction of adding machines. The income made from land bestowed to Lawrence by his father in Coalcliff, however, meant that in 1883 Lawrence was able to resign from his position at the Observatory to pursue his fascination and study into artificial flight. This interest came about from his observation of waves and animal motion, including fish, birds and snakes. Lawrence's earliest experiments, spanning 1884-1892, involved propulsion with monoplane models built from light wood and paper. He first attempted to build a full-size machine capable of carrying a human in 1887 and in 1889 he built his most influential engine - a three cylinder radial rotary engine. Lawrence's later experimental phase, 1892-1909, involved the use of curved surfaces in his models. This research subsequently led to the development of the box kite, the most famous invention associated with his name. Lawrence always conducted his experiments in his local area (i.e. Rushcutters Bay, Woollahra Point and Stanwell Park). He was against patenting his inventions for fear of stifling the development of aviation in the bigger picture and therefore published his results quickly and widely, particularly through the Royal Society of New South Wales. This Society helped Lawrence to gain an international reputation and brought him into contact with other aviation pioneers like Octave Chanute and Otto Lilienthal. The very first paper he gave was "The Trochoided Plane" (delivered August 6, 1884). In Lawrence's later years he conducted research into early Australian history, postulating the theory that two Spanish ships found their way into Sydney Harbour in the late 16th century. Apart from this and of course his interests in aeronautics, Lawrence also concerned himself with the contemporary issues of patent laws, free competition, Darwinism, a bridge for Sydney Harbour, pensions, strikes and conscription. Lawrence Hargrave died of peritonitis at Lister Hospital on July 6, 1915. Lawrence's death came only nine weeks after the death of his youngest son, Geoffrey, at Gallipoli.

SOURCE

Credit Line

Gift of Lawrence Hargrave, 1891

Acquisition Date

6 April 1891

Copyright for the above image is held by the Powerhouse and may be subject to third-party copyright restrictions. Please submit an Image Licensing Enquiry for information regarding reproduction, copyright and fees. Text is released under Attribution-Non Commercial-No Derivative licence.

Image Licensing Enquiry

Object Enquiry